Small projects · real patterns

Make something useful, one small project at a time.

Choose a skill to practise and a project you can finish. Each recipe includes supplies, steps and counts from our own engines. Measure your fabric, customise the supported settings, print the instructions and save your progress.

Diagrams are engine-generated charts and schematics, not photographs. These recipes have not been physically sample-knit or sample-crocheted; mathematical checks do not replace checking gauge, fit and finishing in your own material. Times are estimates from stated paces, not timed samples.

Valentine gifts: a heart coaster, a cross stitch card and a name-and-heart C2C blanket, with charts you can print.

Four first projects with a name

Two knitting projects and two crochet projects: a sewn-on patch, two bookmarks and a coaster. Make the background first, then add the letters with a yarn needle. Each page includes the supplies, skills, fabric rows and separate embroidery positions.

Choose your named first project. The example measurements are starting settings; replace the gauge with a washed, measured sample. Names are entered inside the tool and do not get separate pages.

Illustration of a cream knitted patch with a red A in duplicate stitch

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Knitted initial patch

Knit a small stockinette patch, then embroider an initial or short name over its V-shaped stitches. The lettering comes from the same name-chart engine used by our editable alphabet tool.

See the full project ↗
Illustration of a cream knitted bookmark with red READ lettering

Illustration based on the chart, not a photo of a stitched sample.

Beginner

Knitted name bookmark

Knit a slim bookmark with a stockinette centre and garter edges, then embroider a name along its length. Enter your measured gauge and print the complete pattern.

See the full project ↗
Illustration of a cream single crochet coaster with TEA lettering in red

Illustration based on the chart, not a photo of a stitched sample.

First crochet project

Single crochet coaster

Crochet a square coaster, then embroider a short name or initials on it. The background has no increases or decreases. Its row-by-row count makes it a useful first exercise in recognising the last stitch and keeping the turning chain outside the stitch count.

See the full project ↗
Illustration of a cream crochet bookmark with red READ lettering

Illustration based on the chart, not a photo of a stitched sample.

Beginner

Striped crochet bookmark

Crochet a striped bookmark, then embroider a name along its length. The background changes colour every four rows. Practise straight edges and controlled colour changes on a project that uses small amounts of the same yarn in two colours.

See the full project ↗

One cat, three makes

One original Purlgrid silhouette — a seated cat in side profile, deep indigo on oat — used without cropping or redrawing in three products. Each page shows the same chart in the same orientation, and says how it is worked.

Same source chart (pg-seated-cat-v1, 16 × 22 squares), three products
ProjectTechniqueOne chart square isWhat that means
BeaniePlain stockinette hat in the round, cat added in duplicate stitch1 stitchNo floats. Four engine-checked sizes at 20 sts × 28 rnds; other combinations are rejected.
CushionStockinette front with duplicate stitch, envelope back1 × 1, 2 × 2 or 3 × 3 stitchesWhole-number scaling. Knit stitches are wider than tall, so the cat knits up a little shorter than the square chart.
C2C blanketCorner-to-corner crochet tiles1 × 1 to 4 × 4 tilesTiles are square, so the proportions of the chart are kept. Bobbins and rows come from the C2C engine.
Seated cat beanie (duplicate stitch): engine chart or schematic preview

Confident beginner

Seated cat beanie (duplicate stitch)

A plain stockinette beanie written by our hat engine, with the Purlgrid seated cat silhouette embroidered on the front in duplicate stitch afterwards. No stranded floats: the cat uses the same chart as the cushion and the C2C blanket, one square per stitch.

See the full project ↗
Seated cat cushion with optional pet name: engine chart or schematic preview

Confident beginner

Seated cat cushion with optional pet name

A knitted cushion cover: a stockinette front with the Purlgrid seated cat in duplicate stitch, an optional name below it and an envelope back made of two flaps. Sized from your cushion pad and measured gauge. The cat is our preset silhouette, not a portrait of your pet.

See the full project ↗
Seated cat C2C blanket: engine chart or schematic preview

Confident beginner

Seated cat C2C blanket

The same seated cat chart crocheted corner to corner: each chart square becomes a block of 1–4 square C2C tiles, centred on a standard blanket size with at least three clear tiles around it. Every diagonal row and bobbin comes from the C2C engine.

See the full project ↗

Personalised gifts

Names and initials use our Latin and Russian letter charts, with lowercase and supported accents. Text that does not fit, is too long or uses other characters is shown as an error — it is never shortened or dropped silently. The pet cushion uses our preset cat, not a portrait of your animal.

Named baby blanket (C2C): engine chart or schematic preview

Confident beginner

Named baby blanket (C2C)

A personalised corner-to-corner blanket in stroller or receiving size, made with our existing name-blanket engine: the name and an optional second line are centred at the largest letter size that fits, with every row and bobbin written out.

See the full project ↗
Initialled drawstring bag: engine chart or schematic preview

Confident beginner

Initialled drawstring bag

A personalised version of the knitted drawstring pouch: the same one-piece construction, larger, with up to three initials added to the front in duplicate stitch. Initials that do not fit are rejected, never shrunk or cropped.

See the full project ↗
Seated cat cushion with optional pet name: engine chart or schematic preview

Confident beginner

Seated cat cushion with optional pet name

A knitted cushion cover: a stockinette front with the Purlgrid seated cat in duplicate stitch, an optional name below it and an envelope back made of two flaps. Sized from your cushion pad and measured gauge. The cat is our preset silhouette, not a portrait of your pet.

See the full project ↗

Year-round C2C blanket patterns

Animal, flower and geometric tile graphs with written diagonal rows, per-colour yarn estimates and printable bobbin plans. The existing seated cat blanket remains at its original address.

Illustration of a cream C2C blanket with a blue heron, gold reeds and blue water lines

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Reed heron C2C blanket

Crochet the reed heron blanket from a 40 × 48 tile graph. A long-necked heron stands above three water bands, with a bent neck and a separate cluster of reeds. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a cream C2C blanket with a curled orange sleeping fox

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Sleeping fox C2C blanket

Crochet the sleeping fox blanket from a 40 × 48 tile graph. A rust-coloured fox curls around a broad cream-tipped tail; the pointed ears and closed eye sit above the curve. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a cream C2C blanket with a green tortoise and patterned shell

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Garden tortoise C2C blanket

Crochet the garden tortoise blanket from a 40 × 48 tile graph. A low domed shell has three broad inset panels, four short feet and a head reaching toward the right edge. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a cream C2C blanket with two tulips and green stems

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Tulip duet C2C blanket

Crochet the tulip duet blanket from a 40 × 48 tile graph. Two offset cup-shaped tulips rise on straight stems, with leaves leaning in opposite directions. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a cream C2C blanket with a gold sunflower, brown centre and green leaves

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Sunflower window C2C blanket

Crochet the sunflower window blanket from a 40 × 48 tile graph. An eight-petal flower sits above a curved pair of leaves, with a dark centre and a clear oat margin. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a cream C2C blanket with green fan-shaped ginkgo leaves on a gold stem

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Ginkgo fan C2C blanket

Crochet the ginkgo fan blanket from a 40 × 48 tile graph. Two notched fan leaves spread from a slanting branch; the smaller leaf balances the large upper fan. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a cream C2C blanket with three offset blue and gold diamonds between blue bars

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Offset diamonds C2C blanket

Crochet the offset diamonds blanket from a 40 × 48 tile graph. Three solid diamonds shift across the centre, framed by quiet bands at the top and bottom. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a cream C2C blanket with three stepped blue and rose ribbons

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Stepped ribbons C2C blanket

Crochet the stepped ribbons blanket from a 40 × 48 tile graph. Three wide zigzag ribbons cross the blanket, separated by background tiles instead of fine outlines. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a cream C2C blanket with overlapping green and gold rectangular windows

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Nested windows C2C blanket

Crochet the nested windows blanket from a 40 × 48 tile graph. Two interlocking rectangular frames surround a central window; each band stays several tiles wide. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a C2C blanket with stepped blue, green and gold hills beneath a gold sun

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Terraced hills C2C blanket

Crochet the terraced hills blanket from a 40 × 48 tile graph. A small sun rises above three broad stepped hills; the landscape fills the lower part of a portrait blanket. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗

Seated cat C2C blanket · C2C bobbin calculator · Make a name blanket

All 30 projects

Illustration of a cream C2C blanket with a blue heron, gold reeds and blue water lines

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Reed heron C2C blanket

Crochet the reed heron blanket from a 40 × 48 tile graph. A long-necked heron stands above three water bands, with a bent neck and a separate cluster of reeds. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a cream C2C blanket with a curled orange sleeping fox

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Sleeping fox C2C blanket

Crochet the sleeping fox blanket from a 40 × 48 tile graph. A rust-coloured fox curls around a broad cream-tipped tail; the pointed ears and closed eye sit above the curve. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a cream C2C blanket with a green tortoise and patterned shell

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Garden tortoise C2C blanket

Crochet the garden tortoise blanket from a 40 × 48 tile graph. A low domed shell has three broad inset panels, four short feet and a head reaching toward the right edge. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a cream C2C blanket with two tulips and green stems

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Tulip duet C2C blanket

Crochet the tulip duet blanket from a 40 × 48 tile graph. Two offset cup-shaped tulips rise on straight stems, with leaves leaning in opposite directions. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a cream C2C blanket with a gold sunflower, brown centre and green leaves

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Sunflower window C2C blanket

Crochet the sunflower window blanket from a 40 × 48 tile graph. An eight-petal flower sits above a curved pair of leaves, with a dark centre and a clear oat margin. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a cream C2C blanket with green fan-shaped ginkgo leaves on a gold stem

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Ginkgo fan C2C blanket

Crochet the ginkgo fan blanket from a 40 × 48 tile graph. Two notched fan leaves spread from a slanting branch; the smaller leaf balances the large upper fan. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a cream C2C blanket with three offset blue and gold diamonds between blue bars

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Offset diamonds C2C blanket

Crochet the offset diamonds blanket from a 40 × 48 tile graph. Three solid diamonds shift across the centre, framed by quiet bands at the top and bottom. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a cream C2C blanket with three stepped blue and rose ribbons

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Stepped ribbons C2C blanket

Crochet the stepped ribbons blanket from a 40 × 48 tile graph. Three wide zigzag ribbons cross the blanket, separated by background tiles instead of fine outlines. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a cream C2C blanket with overlapping green and gold rectangular windows

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Nested windows C2C blanket

Crochet the nested windows blanket from a 40 × 48 tile graph. Two interlocking rectangular frames surround a central window; each band stays several tiles wide. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Illustration of a C2C blanket with stepped blue, green and gold hills beneath a gold sun

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Terraced hills C2C blanket

Crochet the terraced hills blanket from a 40 × 48 tile graph. A small sun rises above three broad stepped hills; the landscape fills the lower part of a portrait blanket. Set your measured tile size, then print the graph, yarn estimates and every diagonal row.

See the full project ↗
Garter stitch coaster: engine chart or schematic preview

First project

Garter stitch coaster

A first useful square: practise casting on, knitting every row and binding off without shaping. Its size follows your measured garter-stitch gauge, so the instructions remain useful with a different yarn.

See the full project ↗
Seed stitch coaster: engine chart or schematic preview

Confident beginner

Seed stitch coaster

Learn to switch between knit and purl on a small textured square. The odd stitch count makes the same alternating instruction work on every row; the engine shows the slight size change needed to keep that structure.

See the full project ↗
Garter stitch dishcloth: engine chart or schematic preview

First project

Garter stitch dishcloth

A larger everyday rectangle for building an even knitting rhythm. Use a washable yarn and your own garter gauge, then make a coordinated kitchen set without changing the construction.

See the full project ↗
Flat ribbed headband: engine chart or schematic preview

Confident beginner

Flat ribbed headband

Knit a narrow ribbed strip and join its short ends into a headband. The example length is a starting point, not a universal fit: measure a stretchy swatch and check the strip around your own head before seaming.

See the full project ↗
Illustration of a cream crochet bookmark with red READ lettering

Illustration based on the chart, not a photo of a stitched sample.

Beginner

Striped crochet bookmark

Crochet a striped bookmark, then embroider a name along its length. The background changes colour every four rows. Practise straight edges and controlled colour changes on a project that uses small amounts of the same yarn in two colours.

See the full project ↗
Illustration of a cream single crochet coaster with TEA lettering in red

Illustration based on the chart, not a photo of a stitched sample.

First crochet project

Single crochet coaster

Crochet a square coaster, then embroider a short name or initials on it. The background has no increases or decreases. Its row-by-row count makes it a useful first exercise in recognising the last stitch and keeping the turning chain outside the stitch count.

See the full project ↗
Illustration of a cream knitted patch with a red A in duplicate stitch

Illustration based on the chart, not a photo of a stitched sample.

Confident beginner

Knitted initial patch

Knit a small stockinette patch, then embroider an initial or short name over its V-shaped stitches. The lettering comes from the same name-chart engine used by our editable alphabet tool.

See the full project ↗
Illustration of a cream knitted bookmark with red READ lettering

Illustration based on the chart, not a photo of a stitched sample.

Beginner

Knitted name bookmark

Knit a slim bookmark with a stockinette centre and garter edges, then embroider a name along its length. Enter your measured gauge and print the complete pattern.

See the full project ↗
Whale C2C wall hanging: engine chart or schematic preview

Confident beginner

Whale C2C wall hanging

Turn the original whale motif into one corner-to-corner square. This is a sizeable wall panel at the example tile gauge, with every diagonal row and bobbin generated from the actual graph.

See the full project ↗
Open crochet mug sleeve: engine chart or schematic preview

Beginner

Open crochet mug sleeve

A firm single-crochet strip that wraps a mug with its ends either side of the handle and closes with a chain loop and a button. Its length comes from your measured mug circumference minus the space the handle needs.

See the full project ↗
Mini drawstring pouch: engine chart or schematic preview

Beginner

Mini drawstring pouch

Knit one rectangle, fold it in half and sew two side seams: a small drawstring pouch with garter-stitch top bands and two eyelet rows for the cord (yo, k2tog on the right side; yo, p2tog on the wrong side). Width and depth follow your measured stockinette gauge.

See the full project ↗
Initialled drawstring bag: engine chart or schematic preview

Confident beginner

Initialled drawstring bag

A personalised version of the knitted drawstring pouch: the same one-piece construction, larger, with up to three initials added to the front in duplicate stitch. Initials that do not fit are rejected, never shrunk or cropped.

See the full project ↗
Seated cat beanie (duplicate stitch): engine chart or schematic preview

Confident beginner

Seated cat beanie (duplicate stitch)

A plain stockinette beanie written by our hat engine, with the Purlgrid seated cat silhouette embroidered on the front in duplicate stitch afterwards. No stranded floats: the cat uses the same chart as the cushion and the C2C blanket, one square per stitch.

See the full project ↗
Seated cat cushion with optional pet name: engine chart or schematic preview

Confident beginner

Seated cat cushion with optional pet name

A knitted cushion cover: a stockinette front with the Purlgrid seated cat in duplicate stitch, an optional name below it and an envelope back made of two flaps. Sized from your cushion pad and measured gauge. The cat is our preset silhouette, not a portrait of your pet.

See the full project ↗
Seated cat C2C blanket: engine chart or schematic preview

Confident beginner

Seated cat C2C blanket

The same seated cat chart crocheted corner to corner: each chart square becomes a block of 1–4 square C2C tiles, centred on a standard blanket size with at least three clear tiles around it. Every diagonal row and bobbin comes from the C2C engine.

See the full project ↗
Named baby blanket (C2C): engine chart or schematic preview

Confident beginner

Named baby blanket (C2C)

A personalised corner-to-corner blanket in stroller or receiving size, made with our existing name-blanket engine: the name and an optional second line are centred at the largest letter size that fits, with every row and bobbin written out.

See the full project ↗

Find a project with the start wizard · See what your yarn can make · My projects